Valide la compatibilidad de nuestro producto con su equipo.
Harvest on time through all kinds of weather.
WORK AT THE BEST POSSIBLE TIME
With more than 10 years of experience in the field designing, manufacturing and testing the best product available, the S-TECH 1000X meets the genuine needs of farmers, so they can enjoy the freedom to work at the best possible time, while also protecting their land. This means you will be able to harvest at the most advantageous time, whatever the weather conditions.
EVEN MORE DURABLE
The rubber-coated UHMW plastic wheels increase the service life of both wheels and tracks. The S-TECH 1000X is designed to be a fellow worker you can count on.
QUICK AND EASY INSTALLATION
We know that when it’s harvest time, every second counts! The S-TECH 1000X is easy to install. Thanks to its bolt-on design, you can switch from tires to tracks in under 3 hours, ensuring a flexible harvesting plan.
S-TECH 1000X - Soucy track systems for combine harvesters (youtube.com)
| A | Track width | 914 mm |
| B | Overall length | 3,308 mm |
| C | Overall height | 1,767 mm |
| D | Pivot axis height | 1,016 mm |
| E | Rear tension wheel diameter | 711 mm |
| F | Support wheel diameter | 368 mm |
| Weight | Approximately 12,400 lbs / 5,640 kg | |
| Transport load capacity | Up to 51,500 lbs / 23,400 kg | |
| Maximum transport speed | 27,2 km/h / 17 mph (may vary depending on tire size and transmission configuration) | |
| Load capacity in the field | Up to 81,000 lbs / 36,700 kg | |
| Total ground contact area | 4.40 m² / 6,826 in² | |
| *For the set of 2 tracks | ||
| S-TECH 1000X (Français) | 30/1/2024 | 3,6 MB |
| S-TECH 1000X (English) | 30/1/2024 | 3,6 MB |
| S-TECH 1000X (Português) | 30/1/2024 | 3,6 MB |
| S-TECH 1000X (Español) | 16/5/2024 | 3,6 MB |
When you replace dual wheels with the S-TECH 1000X track system, the ground contact area is 3 to 3.5 times larger. *May vary depending on tire combination.
You’ll be pleased to know that no changes are required to install the S-TECH 1000X on your combine harvester. You don’t need any special lifting tools or equipment other than a torque wrench. You will find detailed explanations for each of the steps to follow in the Soucy User Guide.
S-TECH 1000X installation time is approximately 2 to 3 hours. Installation by at least 2 people is recommended to facilitate the work. Allow a track tension and tracking adjustment time of approximately one hour.
No adapter is required to install the S-TECH 1000X track system on John Deere combine harvesters. However, an adapter may be required to install this system on other brands.
Track wear is affected by the load and the time spent on the road or hard surfaces. To maximize S-TECH 1000X performance and minimize track wear, avoid driving with a cutting head installed on the combine harvester, if possible. Also, if you’re driving with a heavy load, make sure to reduce the speed and make stops.
The life span depends on track system maintenance, compliance with best practices and the type of soil. You will find all the information you need to maximize the life span of your S-TECH 1000X in your Soucy User Guide.
All new S-TECH 1000Xs sold by an authorized dealer are covered by a warranty. Details on the warranty and registration procedures for your track system can be found in your Soucy User Guide.
With the new axle design using oil bath hubs, you no longer need to grease the axles daily or weekly. Just change the oil once a year or after 500 hours of use.
