Validate the compatibility of our product with your equipment.

Your " " is generally compatible with the S-TECH 990.
Contact us to confirm the compatibility with the options and components of your equipment that may affect it.

Your " " is not compatible with the S-TECH 990.
Share your information with us if you want to be contacted when our product becomes compatible with your equipment.

Your form was successfully submitted

An error has occured, try again later

Product

TRACK SYSTEM FOR TRAILERS AND IMPLEMENTS S-TECH 990

Your information

An error has occured, try again later

Your form was successfully submitted

SYS S TECH 990 rendu test2 2024 03 28 143311 iopo 2024 03 28 143339 riyv
TRACK SYSTEM FOR TRAILERS AND IMPLEMENTS

S-TECH 990

Maximize your load capacity to save time.

  • Higher equipment load capacity reducing trips to and from the fields when the ground is moist
  • Multi-purpose track system for harvesting, planting and spraying
  • Minimized soil and crop damage with a larger ground contact area
Variants
How to buy
or
Overview

VERSATILITY
The bolt-on design allows easy installation on a wide range of trailers and implements, from an air seeder in the spring to a grain cart in the fall.

NARROW PROFILE
The S-TECH 990 track system is narrower than the dual wheels typically used on a trailer. At just 36 in (914.4 mm) wide, versus dual-wheel systems which can be as wide as 55 in (1,397 mm), the S-TECH 990 lets you get considerably closer to trucks for easier unloading. Road transport is also safer thanks to a narrow width.

DYNAMIC TENSIONER
The spring tension system clears debris out continuously. The spring contained in the wheel counteracts compression to expel debris as the track system rotates, and without slowing it down.

990
Technical Specifications
A Track width 914 mm
B Overall length 2,969 mm
C Overall height 1,331 mm
D Pivot axis height 856 mm
E Rear tension wheel diameter 711 mm
F Support wheel diameter 368 mm
Weight Approximately 9,960 lbs / 4,520 kg
Transport load capacity Up to 50,000 lbs / 22,700 kg
Maximum transport speed 26.5 km/h / 16.5 mph
Load capacity in the field Up to 90,000 lbs / 41,000 kg
Total ground contact area 3.93m² / 6,084 in²
*For the set of 2 tracks
Mesure S TECH 990 LETTRE
Documents
S-TECH 990 (Français) 2/1/2024 433.2 KB
S-TECH 990 (English) 2/1/2024 431.7 KB
S-TECH 990 (Português) 2/1/2024 433.1 KB
How do I install the S-TECH 990 on my trailer?

The installation is very simple. The track system fits directly onto the wheel hubs without modifying the trailer. You will find detailed explanations for each of the steps to follow in the Soucy User Guide. 

How long does it take to install the S-TECH 990?

S-TECH 990 installation time is approximately 2 to 3 hours. Installation by at least 2 people is recommended to facilitate the work.
 

Which models of trailers are compatible with the S-TECH 990?

S-TECH 990 can be installed on most models of grain carts, air seeders, spreaders, and other trailers with hubs with a pilot of 280 mm (11.05 in) and a bolt circle of 335 mm (13.19 in) ; or hubs with a pilot of 454 mm (17.82 in) and a bolt circle of 512 mm (20.13 in).

Are there different adapter configurations for my trailer?

There are two available configurations that use an adapter plate on the track system to match the hub dimensions. It is easy to make an adapter plate if needed for different dimensions.

Does the S-TECH 990 come with a warranty?

All new S-TECH 990s sold by an authorized dealer are covered by a warranty. Details on the warranty and registration procedures for your track system can be found in your Soucy User Guide.

What is the life span of the S-TECH 990?

The life span depends on track system maintenance, compliance with best practices and the type of soil. You will find all the information you need to maximize the lifespan of your S-TECH 990 in your Soucy User Guide.