Validate the compatibility of our product with your equipment.
Access your fields at all times.
OPTIMAL FLOTATION
You can bank on optimal flotation. Even in difficult soil conditions, the track’s 36 in (914 mm) width and 5,710 in² (3.68 m²) ground contact surface enable you to harvest confidently.
BETTER MANEUVERABILITY
The S-TECH 1000G has a more compact design. This means more maneuverability for you. Turning at the end of the field has never been easier!
QUICK AND EASY INSTALLATION
We know that when it’s harvest time, every second counts! The S-TECH 1000G is easy to install. Thanks to its bolt-on design, you can switch from tires to tracks in under 3 hours, ensuring a flexible harvesting plan.
Soucy Track for Combines - A track system you can count on (youtube.com)
| A | Track width | 914 mm |
| B | Overall length | 2,899 mm |
| C | Overall height | 1,728 mm |
| D | Pivot axis height | 1,016 mm |
| E | Rear tension wheel diameter | 711 mm |
| F | Support wheel diameter | 368 mm |
| Weight | Approximately 9,900 lbs / 4,490 kg | |
| Transport load capacity | Up to 52,250 lbs / 23,700 kg | |
| Maximum transport speed | 28 km/h / 17.5 mph (may vary depending on tire size and transmission configuration) | |
| Load capacity in the field | Up to 65,000 lbs / 29,500 kg | |
| Total ground contact area | 3.68 m² / 5,710 in² | |
| *For the set of 2 tracks | ||
| S-TECH 1000G (Français) | 1/30/2024 | 944.5 KB |
| S-TECH 1000G (English) | 1/30/2024 | 779.1 KB |
| S-TECH 1000G (Português) | 1/30/2024 | 775.8 KB |
When you replace dual wheels with the S-TECH 1000G track system, the ground contact area is 2.5 to 3 times larger. *May vary depending on tire combination.
You’ll be pleased to know that no changes are required to install the S-TECH 1000G on your combine harvester. You don’t need any special lifting tools or equipment other than a torque wrench. You will find detailed explanations for each of the steps to follow in the Soucy User Guide.
S-TECH 1000G installation time is approximately 2 to 3 hours. Installation by at least 2 people is recommended to facilitate the work. Allow a track tension and tracking adjustment time of approximately one hour.
No adapter is required to install the S-TECH 1000G track system on John Deere combine harvesters. However, an adapter may be required to install this system on other brands.
Track wear is affected by the load and the time spent on the road or hard surfaces. To maximize S-TECH 1000G performance and minimize track wear, avoid driving with a cutting head installed on the combine harvester, if possible. Also, if you’re driving with a heavy load, make sure to reduce the speed and make stops.
The life span depends on track system maintenance, compliance with best practices and the type of soil. You will find all the information you need to maximize the life span of your S-TECH 1000G in your Soucy User Guide.
All new S-TECH 1000Gs sold by an authorized dealer are covered by a warranty. Details on the warranty and registration procedures for your track system can be found in your Soucy User Guide.
With the new axle design using oil bath hubs, you no longer need to grease the axles daily or weekly. Just change the oil once a year or after 500 hours of use.
