Validate the compatibility of our product with your equipment.

Your " " is generally compatible with the S-TECH 012P.
Contact us to confirm the compatibility with the options and components of your equipment that may affect it.

Your " " is not compatible with the S-TECH 012P.
Share your information with us if you want to be contacted when our product becomes compatible with your equipment.

Your form was successfully submitted

An error has occured, try again later

Product

TRACK SYSTEM FOR PLANTERS S-TECH 012P

Your information

An error has occured, try again later

Your form was successfully submitted

SYS S TECH 012 P rendu 2024 02 15 203953 ydxm 2024 03 22 124304 gdjf
TRACK SYSTEM FOR PLANTERS

S-TECH 012P

Get the most yield out of your field.

  • Maximized planter load capacity recuding trips to and from the fields when the ground is moist
  • Access to your fields at all times providing wider planting window
  • Reduced pinch-row compaction for a better yield
How to buy
or
Overview

MAXIMUM PERFORMANCE
The use of a track system for planters does not create ruts or mounds of soil when turning at the end of the field. Circulation occurs without leaving a trace, which supports more uniform plant emergence and growth.

PROTECT YOUR SOIL
As the weight is distributed over a larger surface area, there is less pressure on the ground. You therefore protect your land from compaction and offer the best growing conditions for your seeds, as rooting will be easier.

MAXIMUM LOAD CAPACITY
With a total contact surface of 1,622 in² (1.07 m²), the track system allows you to increase your load capacity. By filling your seed tanks to their maximum capacity, you increase efficiency by reducing unnecessary trips to and from the field.

Soucy track system for Case IH planters (youtube.com)

Overview 012p
Technical Specifications
A Track width 305 mm
B Overall length 1,500 mm
C Overall height 663 mm
D Pivot axis height 419 mm
E Rear tension wheel diameter 559 mm
F Support wheel diameter 279 mm
G Front tension wheel diameter 483 mm
Weight Approximately 4,800 lbs / 2,180 kg
Transport load capacity Up to 25,000 lbs / 11,340 kg
Maximum transport speed 32 km/h / 20 mph
Load capacity in the field Up to 30,000 lbs / 13,608 kg
Total ground contact area 1.07 m² / 1662 in²
*For the set of 4 tracks
Mesure S TECH 012 P LETTRE
Documents
S-TECH 012P (Français) 1/30/2024 1.1 MB
S-TECH 012P (English) 1/30/2024 1.1 MB
What is the difference between the ground contact area of the S-TECH 012P and that of tires?

When you replace orginal tires with the S-TECH 012P track system, the ground contact area is approximately 3.7 times larger.

Does the S-TECH 012P cause dirt movement when turning?

No, the relatively short footprint and low-profile track minimize dirt movement when turning.

On which planter models can I install the S-TECH 012P?

Our S-TECH 012P track system for planters is compatible with Case IH models 1250, 1255 and 2150, White models 9816VE, 9824VE and Massey Ferguson models VF16 and VF24.
 

How do I install the S-TECH 012P on my planter?

You’ll be pleased to know that no changes are required to install the S-TECH 012P on your planter. In addition, no special tools or lifting equipment are required. You will find detailed explanations for each of the steps to follow in the Soucy User Guide.

How long does it take to install the S-TECH 012P?

S-TECH 012P installation time is 4 to 5 hours on average and can vary depending on the type of planter. Accessories require additional installation time.

What is the life span of the S-TECH 012P?

The life span depends on track system maintenance, compliance with best practices and the type of soil. You will find all the information you need to maximize the life span of your S-TECH 012P in your Soucy User Guide.

Does the S-TECH 012P come with a warranty?

All new S-TECH 012Ps sold by an authorized dealer are covered by a warranty. Details on the warranty and registration procedures for your track system can be found in your Soucy User Guide.